Customer Wins Jump Starter In Drawing From ASEDeals

Check out this sweet ride on our BendPak XPR9 two post lift. This picture was send in to us by a customer.

The customer is Susan Ashborn from Bristol, CT. She purchased this lift from us recently and send in some photos to us to show off her lift and her beautiful car. This is what people do. They like to share images for their pet project cars along with one of our car lifts.

The XPR-9 two post lift is a floorplate style hoist. Every two post lift has equalizer cables as well as hydraulic lines that must run across from one column to the other. They need to place them in one of two locations, either along the floor, under a plate of steel, (hence the term “Floorplate”) or at the top. When they run at the top, they are called clear floor lifts.

Clear floor lifts typically stand  at about 12 feet tall, so you would need to have adequate ceiling height. If you don’t, you would need to get the floorplate model. The floor plate sysle lifts are made for shops with ceilings that are too low for the clear floor lifts. Most folks tend to prefer the clearfloor lifts provided they have enough ceiling height.  They prefer a clearfloor model because the floor plate acts like a speed bump. It make it difficult to roll items across the floor underneath the lift. Things like transmission jacks, tool carts, oil drains, etc. are difficult to get over the plate. It still can be done. The plate is only 1.5″ high in most cases, and it is ramped up on each end. But it is more difficult. Another key difference is that the clearfloor 2 post lift has a shut off bar at the top. The switch gets activated when the roof of the car hits it. Of course, a floor plate model does not have a shut off bar at the top, so the user must monitor the vehicle as it’s being raised to make sure it doesn’t go into the ceiling above.

After this brief two post lift tutorial, you hopefully have a better understanding of the two different styles. There are many other factors involved in choosing a twio post lift. You can find them in other past posts on this blog.

 

BendPak XPR9 Lift - Susan Ashborn