Why Choose BendPak Lifts – Two Post Lifts

Here is a brief outline of why BendPak Two Post Lifts are superior to most other two post lifts out there on the market today.

Our Bend Pak Lifts are a smart choice for those who want a top-of-the-line automotive lift, but don’t want to pay top-of-the-line prices.

Bend Pak is one of America’s largest car lift manufacturers and produces some of the lowest price ALI & ETL approved two post lifts in the industry. They’re unrivaled when it comes to quality, workmanship, and durability. BP has been around for over 40 years, and we have been carrying them for over 14 years.

They are ALI Certified, which means they meet very strict quality and safety standards, and that they were tested not just by anybody, but by the recognized authority on the subject, the Automotive Lift Institute. Most lifts are not ALI Certified.

They have top-of-the-line features like triple telescoping arms, (10,000 lb front arms only, and 12,000 lb. all 4 arms). These arms allow you to get at difficult to reach jacking points that you may not be able to get at with the standard two stage arms that most lifts have.

They have larger equalizer cable pulleys that allow the equalizer cables to last twice as long. Plus the pulleys have three times the bearing surface area, which makes them last three times as long.

They have better arm restraints, and are just heavier duty, (they weigh several hundred pounds more than the typical two post lift).

They also have the preferred direct-drive lifting system, (clearfloor models) that is not only safer than cable or chain drive, but will save you money in the long run on expensive wear parts like cables, chains and pulleys.

They have taller lift carriages, (53″) which means less stress on the columns.

The cylinders operate on a lower pressure, which means you won’t need to change the seals as frequently.

They also have a superior warranty, which is 5 years on structure, one year on power unit and one year of on-site service, so if you have a warranty issue that cannot be resolved by simply troubleshooting by phone, sending you out the parts and talking you through installing them, they will send somebody out on-site if necessary.

The asymmetric models can also position the vehicle symmetrically as well, so you get the best of both worlds. This can be handy in those situations where a certain vehicle (typically longer, or rear-heavy vehicles) don’t balance out the well asymmetrically, and you need to move the vehicle forward more to help balance it out.

You simply won’t find a better quality Two Post Lift at a lower price – period.

BendPak Two Post Lift